You
are in Home | Materials and Coatings | Products | AMJ-700-IBU
AMJ-700-IBU Blue Paint/Coating for Logos and Emblems on Spacecraft
 |
Above AMJ-700-IBU sample stayed the same color1 after 4 years of space exposure on MISSE.
|
AMJ-700-IBU is an inorganic blue paint developed for use on spacecraft and satellites. A specialized pigment in a silicate binder, AMJ-700-IBU can be spray deposited with standard air spray painting equipment or high-volume low-pressure system to form a bendable inorganic nonspecular blue marker coating for use on emblems, logos, signs etc. on spacecraft / satellites. NASA has tested AMJ-700-IBU exposed to atomic oxygen (AO) fluence of 5.6 x 1022 atoms/cm2 and vacuum ultraviolet (VUV) energy. It has also be tested for resistance to ultraviolet (UV) radiation for a duration of 566 equivalent solar hours. Less than 2% deterioration in solar absorptance (α_s) and less than 1% change in thermal emittance (ε_t). AMJ-700-IBU will be tested in the near future for flammability and toxicity requirements per NHB 8060.1C and being completely inorganic this coating is expected to pass these tests.
This spacecraft / satellite paint has been thoroughly tested in space, having been flown on the Materials International Space Station Experiment (MISSE). AZ Technology used AMJ-700-IBU in coating all NASA logos (and ESA logos) currently on the International Space Station (view image at lower left).
View pre- and post-flight data for AMJ-700-IBU on MISSE (after 4 years in space) .
The table below lists the optical and application parameters of cured AMJ-700-IBU.
| Nominal Surface Resistivity |
N/A |
| Thermal Emittance (ε_t) |
0.88 ± 0.02 |
| Solar Absorptance (α_s) |
~0.76 at ≥ 3.0 mils thickness |
| Use Temperature Range |
-180 C to 900 C |
| Appearance/Color |
Nonspecular optical blue |
| Nominal Dry Thickness |
3.0 ± 1.0 mils (over 85% of coated area) |
| ASTM D3359A Adhesion Grade |
Not less than 3A |
| Full Cure |
7 Days |
1On screen color may vary.
Note: terms reflectance, emittance and absorptance and terms reflectivity, emissivity and absorptivity are often used interchangeably. |